{"id":3791,"date":"2026-11-20T19:16:51","date_gmt":"2026-11-20T11:16:51","guid":{"rendered":"http:\/\/www.sadhanaeducationsociety.com\/blog\/?p=3791"},"modified":"2026-11-20T19:16:51","modified_gmt":"2026-11-20T11:16:51","slug":"how-to-reduce-drift-loss-in-a-closed-cooling-tower-4270-39a704","status":"publish","type":"post","link":"http:\/\/www.sadhanaeducationsociety.com\/blog\/2026\/11\/20\/how-to-reduce-drift-loss-in-a-closed-cooling-tower-4270-39a704\/","title":{"rendered":"How to reduce drift loss in a closed cooling tower?"},"content":{"rendered":"<p>As a closed cooling tower supplier with decades of experience working with industrial facilities, I\u2019ve lost count of how many times site managers come to me frustrated: their energy bills are spiking, maintenance teams are dealing with more frequent equipment repairs, and outdoor areas near their towers are covered in unsightly white residue. Nine times out of ten, the root cause isn\u2019t a faulty tower\u2014it\u2019s drift loss, the tiny droplets of cooling water that get carried out of the tower with exhaust air. <a href=\"https:\/\/www.zhonglingcooling.com\/closed-circuit-cooling-tower\/closed-cooling-tower\/\">Closed Cooling Tower<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.zhonglingcooling.com\/uploads\/48556\/small\/industrial-round-counter-flow-cooling-tower3dc1f.jpg\"><\/p>\n<p>Drift loss isn\u2019t just a nuisance. For our customers, it adds up to millions in wasted water every year, and in some cases, it can lead to regulatory fines for excessive water discharge and environmental contamination. That\u2019s why, for years, we\u2019ve worked hand-in-hand with our clients to develop practical, science-backed strategies to reduce drift loss in closed cooling towers. Let\u2019s break down what drift loss is, why it happens, and the steps you can take to cut it\u2014without sacrificing your tower\u2019s performance or driving up operational costs.<\/p>\n<p>First, let\u2019s clarify what drift loss actually is, because it\u2019s often confused with evaporation loss. Evaporation is natural: as water evaporates to absorb heat from the process side of a closed cooling tower, it leaves behind dissolved solids, so you have to top off the system with fresh water regularly. That\u2019s normal, and it\u2019s not the waste we\u2019re targeting here. Drift loss, by contrast, is the unintended carryover of liquid water droplets from the tower\u2019s fill and mist elimination system. These droplets are small enough (usually between 10 and 100 microns) to get caught in the tower\u2019s exhaust airflow and blown offsite. For industrial closed cooling towers, which handle large volumes of water, drift can account for anywhere from 0.01% to even 0.5% of total water circulation\u2014numbers that add up fast when you\u2019re moving hundreds of gallons per minute.<\/p>\n<p>So why does drift happen, and how can you fix it? The solutions fall into four core categories: optimizing mist elimination, maintaining your tower\u2019s internal components, adjusting operational practices, and upgrading when necessary. Let\u2019s start with the most impactful: mist elimination, the last line of defense against drift.<\/p>\n<p>Mist eliminators (also called drift eliminators) are the critical components designed to catch water droplets before they escape the tower. They\u2019re typically made of PVC or FRP (fiberglass-reinforced plastic) and arranged in a pattern of curved plates or honeycomb structures that force the exhaust air to change direction rapidly. When air hits these turns, water droplets are flung out of the air and back into the tower\u2019s sump, rather than being carried away.<\/p>\n<p>But here\u2019s the thing: not all mist eliminators are created equal, and even the best ones will underperform if they\u2019re not sized, installed, and maintained correctly. For example, many older closed cooling towers come with low-efficiency drift eliminators designed for open towers\u2014devices that have a collection efficiency of 80% or less. For closed systems, which often operate with tighter water chemistry controls and lower allowable drift, we recommend upgrading to high-efficiency drift eliminators with a collection efficiency of 95% or higher. These newer models use advanced blade geometry, like multi-curved or chevron designs, to catch even smaller droplets without increasing air resistance, which would force your fan to work harder and use more energy.<\/p>\n<p>Another common mistake with mist eliminators is poor clearance and installation. If the eliminators are too close to the fan discharge, or if gaps exist between the eliminator modules and the tower\u2019s interior walls, unfiltered air can escape, carrying droplets with it. Last year, we worked with a food processing plant in the Midwest that had a drift loss problem leading to mineral buildup on their exterior equipment. When we inspected their tower, we found that their original drift eliminators had been installed with 1-inch gaps along the side walls, and the eliminator blades were warped from 15 years of sun exposure. Replacing the warped eliminators and sealing the side gaps cut their drift loss by 72% in just two weeks\u2014no other changes needed. That\u2019s a huge win for a relatively low-cost upgrade.<\/p>\n<p>Next, you need to look at your tower\u2019s internal fill media, because the type and condition of your fill plays a big role in how much water is exposed to airflow\u2014and how many droplets get blown free. Closed cooling towers use two types of fill: film fill and splash fill. Film fill, which is a thin, corrugated sheet material, is the most common in modern closed systems because it maximizes surface area for heat transfer without creating large water droplets. Splash fill, which breaks water into larger droplets, can actually contribute to more drift if not paired with high-quality eliminators. That said, even film fill can become a problem if it\u2019s degraded or poorly matched to your tower\u2019s airflow rate.<\/p>\n<p>Over time, film fill can become clogged with mineral scale, biological growth (like algae or biofilm), or debris from the process water. When fill is clogged, airflow through the tower becomes uneven: some sections have too much air, carrying droplets out, while other sections have too little, reducing heat transfer efficiency. We saw this at a chemical plant in Texas last year, where their drift loss had risen to 0.4% of total flow\u2014well above the industry average. When we pulled out a section of their film fill, we found it coated in a 1\/8-inch thick layer of calcium carbonate scale, which had bent the fill sheets and created pockets where water pooled and was swept away by air. We worked with their maintenance team to descale the fill, adjust their water treatment chemistry to prevent future scaling, and add a small amount of makeup water to improve airflow distribution. Within a month, their drift loss dropped to 0.08%\u2014a 80% reduction\u2014while also boosting their tower\u2019s heat transfer efficiency by 12%. That\u2019s a double win: less water waste, lower energy use, and fewer unplanned shutdowns for equipment maintenance.<\/p>\n<p>Another key operational factor that affects drift loss is your tower\u2019s airflow and water distribution balance. In many closed cooling towers, water is sprayed over the fill via a distribution system (either spray nozzles or a trough and pipe system). If nozzles are clogged or misaligned, you\u2019ll end up with uneven water flow: some parts of the fill are too dry, leading to excess airflow that can carry droplets, while other parts are flooded, creating large droplets that are easy to blow off. For example, a power generation client we work with had a problem with drift contaminating nearby natural areas, and testing showed their nozzles were 30% clogged with sediment from their process water. Replacing the old spray nozzles with adjustable, self-cleaning nozzles that distribute water evenly across the entire fill area reduced their drift loss by an additional 15% after we upgraded their mist eliminators.<\/p>\n<p>You also have to consider your fan speed and operating conditions. Closed cooling towers are often designed to handle peak heat loads in the summer, but in milder months, many operators run their fans at full speed even when they don\u2019t need to. Running the fan at a higher speed than necessary increases the airflow rate through the tower, which can carry more water droplets out with the exhaust. Installing variable frequency drives (VFDs) on your tower fans lets you adjust fan speed to match your current heat load, which not only reduces energy use but also lowers drift loss. Last year, a pharmaceutical plant switched from fixed-speed fans to VFDs on their two closed cooling towers, and they reported a 22% drop in drift loss\u2014along with a 18% reduction in their annual electricity bill. It\u2019s a small change that delivers big results.<\/p>\n<p>Wait, but what about water chemistry? Does that play a role in drift loss? It might not directly cause drift, but poor water chemistry can lead to issues that worsen drift over time. For example, if your system has too high a concentration of dissolved solids, it can lead to scaling on fill and nozzles, as I mentioned earlier. If you have too little biocide, biological growth can clog fill and nozzles, disrupting water flow. If your pH is off, it can corrode components, leading to rust and debris that also clog internal parts. All of these issues create uneven water and airflow, which increases drift. We always recommend working with a water treatment specialist to maintain balanced water chemistry\u2014this isn\u2019t just about reducing drift, it\u2019s about extending your tower\u2019s lifespan and avoiding costly repairs.<\/p>\n<p>Now, let\u2019s talk about when it\u2019s time to upgrade your entire closed cooling tower, or major components, to reduce drift. If your tower is more than 15 years old, it might be using outdated design principles that make it hard to reduce drift further. Older towers often have lower airflow efficiency, poorly designed mist eliminators, and fill media that\u2019s not optimized for modern closed system requirements. For example, we recently retrofitted a food processing plant\u2019s 20-year-old closed cooling tower: the original tower had drift loss of 0.3% and high energy use. We replaced the old drift eliminators with high-efficiency models, upgraded the film fill to a more modern, corrosion-resistant type, added VFDs to the fans, and adjusted the water distribution system. The plant\u2019s drift loss dropped to 0.06%, they saved 25% on energy costs, and they haven\u2019t had to do major maintenance on the tower\u2019s internal components in the two years since the retrofit.<\/p>\n<p>I should also mention that every facility\u2019s needs are different. What works for a chemical plant might not work for a data center, which has different heat load requirements and water availability. That\u2019s why we don\u2019t take a one-size-fits-all approach. When a client comes to us with a drift loss problem, we start with a full audit: we measure drift rate using industry-standard testing methods (like the salt tracer method), inspect all internal components, review their operational data, and analyze their water chemistry. Then we build a custom plan that addresses their specific issues, whether that\u2019s a small maintenance fix, a component upgrade, or a full retrofit.<\/p>\n<p>One of the most common questions we get is: \u201cHow much can I really save by reducing drift loss?\u201d Let\u2019s do a quick example. Suppose you have a closed cooling tower that circulates 500 gallons per minute (GPM) of water, and your current drift loss is 0.2% of total flow. That\u2019s 1 GPM of water lost to drift, which adds up to 1,440 gallons per day, more than 525,000 gallons per year. If your local water cost is $3 per 1,000 gallons, that\u2019s over $1,500 a year in water waste\u2014just from drift. Add in the cost of treating that makeup water, and the environmental fines you might face if drift is contaminating nearby areas, and the total cost adds up to far more. Reduce that drift loss to 0.05%, and you\u2019re saving over $1,100 a year in water and treatment costs alone\u2014no other changes needed. Even if you spend $5,000 on a drift eliminator upgrade, that\u2019s a payback period of less than 5 years, and you\u2019ll keep saving money for the life of the component.<\/p>\n<p>Of course, there are regulatory considerations too. In many regions, environmental agencies set limits on drift loss from cooling towers to prevent water waste and air contamination. For example, the EPA in the U.S. has guidelines for cooling tower drift, and many state-level environmental agencies have specific limits. Reducing drift below those limits not only keeps you compliant, it also avoids the risk of fines that can run into thousands of dollars a month. That\u2019s another reason to prioritize drift reduction: it\u2019s a cost-saver and a risk-mitigator, not just a \u201cnice to have.\u201d<\/p>\n<p>I want to emphasize that reducing drift loss isn\u2019t just about fixing a problem\u2014it\u2019s about optimizing your entire closed cooling tower\u2019s performance. When you cut drift, you\u2019re not only saving water; you\u2019re often improving heat transfer efficiency, reducing energy use, and extending the lifespan of your tower\u2019s components. That\u2019s why it\u2019s one of the most impactful maintenance and upgrade investments you can make for your industrial system.<\/p>\n<p>If you\u2019re dealing with high drift loss, or if you\u2019re looking to optimize your closed cooling tower\u2019s performance, we\u2019re here to help. Our team has worked with hundreds of facilities across industries to identify drift issues and implement customized solutions that deliver measurable results. We don\u2019t just sell components\u2014we partner with our clients to audit their systems, test for drift, and build a plan that fits their budget and operational needs. Whether you need a simple inspection, a component upgrade, or a full tower retrofit, we can help you cut waste, save money, and stay compliant.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.zhonglingcooling.com\/uploads\/48556\/small\/cross-flow-and-counterflow-cooling-tower4eb60.jpg\"><\/p>\n<p>If you\u2019re ready to take the next step, reach out to our team to schedule a free system audit. We\u2019ll come to your facility, test your drift rate, inspect your components, and give you a clear, actionable plan to reduce drift loss and improve your tower\u2019s performance. Don\u2019t let unnecessary water waste drain your budget\u2014let\u2019s work together to make your closed cooling tower work better for you.<\/p>\n<p><a href=\"https:\/\/www.zhonglingcooling.com\/open-circuit-cooling-tower\/square-cooling-tower\/\">Square Cooling Tower<\/a> References<br \/>\nASHRAE Handbook \u2013 HVAC Systems and Equipment, American Society of Heating, Refrigerating and Air-Conditioning Engineers, 2020.<br \/>\nCooling Technology Institute. Cooling Drift Loss: Measurement and Control Guidelines, 2019.<br \/>\nWater Research Foundation. Impacts of Drift and Evaporation from Industrial Cooling Towers, 2018.<br \/>\nU.S. Environmental Protection Agency. Industrial Cooling Tower Best Management Practices, 2021.<\/p>\n<hr>\n<p><a href=\"https:\/\/www.zhonglingcooling.com\/\">Zhongling Electric Cooling Equipment Co., Ltd.<\/a><br \/>As one of the most professional closed cooling tower manufacturers and suppliers in China, we warmly welcome you to wholesale durable closed cooling tower at competitive price from our factory. If you have any enquiry about quotation, please feel free to email us. Customized orders are welcome.<br \/>Address: Junshan Rongqi Avenue, Yunshan Economic Development Zone, Yongxiu County, Jiujiang City, Jiangxi Province<br \/>E-mail: gongmeichuang@126.com<br \/>WebSite: <a href=\"https:\/\/www.zhonglingcooling.com\/\">https:\/\/www.zhonglingcooling.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>As a closed cooling tower supplier with decades of experience working with industrial facilities, I\u2019ve lost &hellip; <a title=\"How to reduce drift loss in a closed cooling tower?\" class=\"hm-read-more\" href=\"http:\/\/www.sadhanaeducationsociety.com\/blog\/2026\/11\/20\/how-to-reduce-drift-loss-in-a-closed-cooling-tower-4270-39a704\/\"><span class=\"screen-reader-text\">How to reduce drift loss in a closed cooling tower?<\/span>Read more<\/a><\/p>\n","protected":false},"author":149,"featured_media":3791,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3754],"class_list":["post-3791","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-closed-cooling-tower-4b05-39e65f"],"_links":{"self":[{"href":"http:\/\/www.sadhanaeducationsociety.com\/blog\/wp-json\/wp\/v2\/posts\/3791","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.sadhanaeducationsociety.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.sadhanaeducationsociety.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.sadhanaeducationsociety.com\/blog\/wp-json\/wp\/v2\/users\/149"}],"replies":[{"embeddable":true,"href":"http:\/\/www.sadhanaeducationsociety.com\/blog\/wp-json\/wp\/v2\/comments?post=3791"}],"version-history":[{"count":0,"href":"http:\/\/www.sadhanaeducationsociety.com\/blog\/wp-json\/wp\/v2\/posts\/3791\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.sadhanaeducationsociety.com\/blog\/wp-json\/wp\/v2\/posts\/3791"}],"wp:attachment":[{"href":"http:\/\/www.sadhanaeducationsociety.com\/blog\/wp-json\/wp\/v2\/media?parent=3791"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.sadhanaeducationsociety.com\/blog\/wp-json\/wp\/v2\/categories?post=3791"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.sadhanaeducationsociety.com\/blog\/wp-json\/wp\/v2\/tags?post=3791"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}