Posted in

What is the installation height of LED street lights?

If you’ve ever stood under a street light on a dim, foggy night or squinted at a crosswalk while driving at dusk, you’ve probably wondered: why does that light feel either too faint to see clearly or so bright it hurts your eyes? As someone who’s spent the last seven years selling LED street lights, I can tell you the answer starts with one simple, often overlooked detail: installation height. This isn’t a random number we pick when delivering fixtures to a city or a housing development—it’s a science, a balance of safety, energy efficiency, and long-term cost savings that separates a good LED street light setup from one that wastes money and fails the people who rely on it. LED Street Light

I first learned this lesson the hard way, back in 2017. My team delivered a bulk order of our 150-watt LED street lights to a small suburban town in Ohio, right off the turnpike. The town’s public works director, a guy named Joe who’d been doing this for 30 years, insisted we install them 22 feet high—his crews had always set traditional high-pressure sodium (HPS) lights at that height, and he saw no reason to change. We didn’t push back; we were new to the commercial market, eager to prove our lights worked, so we followed his lead. A month later, Joe called us, frustrated. The lights looked dim on the highway, and residents had already called the town hall about dark stretches along the neighborhood side streets. We went back, took measurements, and realized our mistake: HPS lights emit a wide, yellow glow that spreads out as they get higher, so a 22-foot pole made sense for their 250-watt HPS fixtures. But LED lights are directional—they focus light downward, not outward in all directions. At 22 feet, our LED lights weren’t reaching far enough to cover the 60-foot road lanes Joe wanted lit. When we adjusted the poles to 28 feet, the difference was immediate. The highway stretch lit evenly, no dark spots, and the neighborhood side streets suddenly had enough light for kids walking to the bus stop at 6 a.m. That day, I stopped seeing installation height as a box to check and started seeing it as the first rule of working with LED street lights.

So, what is the actual installation height for LED street lights? The short answer is that it depends on three main factors: road width, light output (measured in lumens, not watts—another common mistake new customers make), and the type of area you’re lighting. Let’s break this down, because “it depends” is the right answer, not a cop-out.

First, road width. This is the biggest variable. For residential streets, which are usually 20 to 30 feet wide (one lane in each direction, plus a small curb or sidewalk), the standard installation height is 22 to 28 feet. Why? The rule of thumb here is that the height of the pole should be roughly equal to the width of the road it’s lighting. If your street is 25 feet wide, a 25-foot pole will place the light fixture high enough to spread its glow evenly across both lanes, with no gaps at the edges where pedestrians or cyclists could be hidden. For collector streets—busier than residential, 30 to 40 feet wide, with more car traffic—you’ll want to bump that height up to 28 to 35 feet. For arterial roads, the big highways and main thoroughfares that are 40 to 60 feet wide, the sweet spot is 35 to 45 feet. I’ve worked on projects in Texas where a 50-foot wide highway used 40-foot poles, and the lights lit every inch of the road without spilling over into adjacent neighborhoods (that light spill is a common complaint, by the way—high LED placement eliminates a lot of that).

Next, lumens. This is where so many customers go wrong. Back in the HPS era, people used watts to gauge brightness, and that stuck for a lot of folks who are new to LED. But watts measure energy use, not light output. LED street lights are far more efficient, so a 100-watt LED can put out the same amount of light as a 250-watt HPS. If you match an HPS fixture’s wattage to an LED, you’re either using way too much energy or not enough. So, when pairing lumens with height, here’s the general guide: if you have a 25-foot pole for a residential street, you’ll want a LED light with 4,000 to 6,000 lumens. For a 30-foot pole on a collector street, 6,000 to 10,000 lumens. For a 40-foot pole on an arterial road, 12,000 to 18,000 lumens. At 45 feet, you might go up to 20,000 lumens. If you put a low-lumen light on a tall pole, it will be dim and spotty—like the Ohio mistake, but flipped. If you put a high-lumen light on a short pole, you’ll get that glare I mentioned earlier, which is bad for drivers’ eyes and actually reduces visibility at night. Our team always walks clients through a lumen-height calculation based on their road specs, because getting this right cuts their energy bills by 30 to 50% compared to old HPS setups.

Then there’s the area type, which adds extra layers. For residential neighborhoods, you also have to account for nearby trees, house overhangs, and setback requirements from property lines. A lot of cities have rules that street lights can’t be too high because they’ll shine into people’s bedrooms at night—light pollution is a huge deal now, and LED lights are great for reducing it, but only if they’re mounted at the right height. I had a client in a historic district in Charleston last year who insisted on 20-foot poles because of historic zoning rules. We worked with him to use 8,000-lumen directional LED lights, mounted 18 inches from the pole’s top, that directed light straight down, not outward or upward. The shorter height meant we didn’t violate zoning, and the directional light meant almost no glare or light in people’s windows. It was a win, but only because we adjusted both height and fixture direction to fit his constraints. For parks, bike paths, or industrial areas, the rules change too. Industrial areas might need lights 40 to 50 feet high with higher lumens to cover large open lots, while bike paths can get away with shorter 18 to 25-foot poles if they’re spaced closely enough.

Wait, but what about spacing between poles? Installation height and spacing go hand in hand, right? I can’t talk about height without mentioning spacing, because one doesn’t work without the other. For most road types, the distance between two LED street lights should be 2.5 to 4 times the pole height. So, if you have a 28-foot pole, the lights should be spaced 70 to 112 feet apart. That ensures the light from each pole overlaps just enough to eliminate dark spots. If your poles are too far apart, even at the right height, you’ll get a “strobing” effect as cars pass between them, which is distracting for drivers. If they’re too close, you’re wasting money on extra fixtures and electricity. On that Ohio highway project, we ended up with 28-foot poles spaced 90 feet apart, which is exactly 3.2 times the height—perfect for that 25-foot residential side street.

I get why this feels complicated. When a city is updating its street light infrastructure, they have budgets to hit, timelines to keep, and residents to please. No one wants to spend extra money on poles that are a few feet taller, but the savings over time are enormous. Let me do the math for you. A standard 250-watt HPS street light uses about $180 a year in electricity, plus $100 a year in maintenance (replacing bulbs, ballasts, etc.) per light. A comparable LED light, when mounted at the right height, uses about $70 a year in electricity and $15 a year in maintenance. That’s a $195 annual savings per light. But if you mount that LED light at the wrong height, you’ll either get dim light (so you have to install more lights, wasting money) or glare (so you have to adjust, costing extra labor). Getting the height right means that first calculation works every time.

Over the years, I’ve seen so many projects go wrong because the height was an afterthought. A small town in Iowa that installed 20-foot poles with too-bright LED lights, leading to dozens of complaints about glare and light pollution. A housing development in Florida that used 30-foot poles for a 20-foot wide road, leaving dark spots by the playground where kids play. A highway project in Arizona that used too-tall poles, leading to light spill that bothered nearby residents and wasted energy. The ones that go right? They take the time to measure their roads, calculate lumens, and pick the right height. It’s not rocket science, but it’s not guesswork either.

So, if you’re a city planner, a housing developer, or anyone looking to update street lights, what should you do first? Don’t just go by what you’ve always done with HPS lights. Reach out to someone who knows LED street lights inside and out—like my team. We’ll send someone to measure your roads, talk through your area’s rules (zoning, light pollution limits, setbacks), and calculate exactly what height and lumens you need. We’ll also explain the long-term savings, so you can see how a small investment in the right poles pays off in lower energy bills and fewer maintenance calls for years.

At the end of the day, LED street lights aren’t just a shiny new technology—they’re a tool to make public spaces safer and more efficient. And that starts with getting the height right. No more squinting at dark crosswalks, no more glare when you’re driving home late at night, no more wasting money on lights that don’t work. It’s all about balance, and balance starts with that first decision: how high do we put the light?

If you’re ready to upgrade your street light setup, or just have questions about installation height, lumens, or anything else related to LED street lights, reach out to our team. We’re here to help you find the right solution for your project, no matter how big or small.

UFO LED Highbay Lights References:

  1. Illuminating Engineering Society (IES). (2020). IES Recommended Practice for Roadway Lighting (RP-8-20).
  2. U.S. Department of Energy. (2022). LED Street Lighting: Best Practices for Installation and Maintenance.
  3. International Dark-Sky Association (IDA). (2021). Outdoor Lighting Guidelines for Reducing Light Pollution.
  4. National Association of City Transportation Officials (NACTO). (2019). Urban Street Design Guide.

Luxsky Lighting Co., Limited
Luxsky Lighting Co., Limited is one of the most professional led street light manufacturers and suppliers in China, also supports customized service with low price. Welcome to wholesale the high quality and energy saving led street light made in China here from our factory. Contact us for quotation.
Address: 1-6#, Tongfukang High-Tech Industrial Park, Ai’qun Road, Shiyan Town, Bao’an District, Shenzhen City, Guangdong, China
E-mail: sales@luxsky-light.com
WebSite: https://www.luxsky-light.com/