When I started my career as a general components supplier, I made a lot of mistakes. Early on, when a local robotics startup reached out needing parts for their first line of warehouse pickers, I was so eager to fill the order that I sent over every steel bracket, plastic gear, and electrical connector I had in stock, thinking more choice would make their design easier. A week later, their lead engineer called, frustrated: half the parts didn’t fit their existing CAD files, the other half had untested tolerances, and they’d spent three days sorting through my inventory instead of building prototypes. That call taught me one of the most critical lessons in my decades of working with engineers and product teams: designing a system with general components isn’t just picking parts from a catalog—it’s matching flexible, reliable, interchangeable pieces to a larger goal, without cutting corners that will come back to haunt you later. General Components

Today, that same robotics company is one of my most loyal clients, and they still lean on me when they need to scale their picker lines without overcomplicating their supply chain. Over the years, I’ve worked with teams building everything from medical device enclosures to agricultural irrigation systems, and the core principles of good general component system design stay the same, no matter the industry. Let’s walk through how to get it right, starting with the basics that no one talks about until they’re too far into a project.
First, stop treating general components as “one-size-fits-all” off-the-shelf shortcuts. When I say general components, I’m not referring to cheap, untested parts that are mass-produced to meet the lowest possible standard. I’m talking about standardized, interchangeable parts—aluminum extrusion profiles, linear bearings, crimp terminals, pneumatic valves—that are designed to work across multiple applications, with consistent dimensions, material grades, and performance specs. The mistake many teams make is prioritizing a part that’s cheap today over one that’s validated for general use. For example, a few years back, a small renewable energy firm I worked with wanted to build a solar tracker system and picked a $0.25 plastic bearing for their pivot joints to cut costs. That bearing was listed as “general purpose” in the catalog, but it wasn’t rated for the 10,000 hours of outdoor use the tracker needed. Six months after installation, 20% of their trackers seized up in the Arizona heat, and they had to replace all 500 pivot joints at a cost 10 times what they would have paid for a slightly more expensive bearing rated for UV resistance and high load. The lesson here: general components should be standard, but they shouldn’t be generic. Always check for industry certifications, standardized dimensions (like ISO or ANSI ratings), and third-party test data that proves the part works in systems similar to yours.
Next, map the system’s requirements before you open a catalog. I can’t tell you how many times I’ve had an engineer call and say, “I need a component for X system—what do you have?” That’s like walking into a hardware store and saying, “I need a piece of wood” with no idea if you’re building a birdhouse or a deck. Before you even look at parts, write down two sets of requirements: functional and environmental. Functional requirements are what the system has to do: for a robotic picker, that might be moving a 5-pound box 3 feet per second with 0.1mm precision, or supporting 10,000 load cycles before wear. Environmental requirements are where it has to do it: for a food processing machine, that might be exposure to daily high-pressure washdowns, or for a mining truck component, resistance to dust and vibration. Once you have these, you can narrow down general components that check those boxes, instead of wasting time on parts that look good but don’t fit the job. For the solar tracker example I mentioned earlier, the team only needed a few minutes to write down environmental requirements (outdoor, UV, temperature swings from -10°F to 110°F) and functional requirements (10,000 load cycles, 200-pound dynamic load) before they realized the cheap plastic bearing was a bad fit. They swapped it for a general purpose self-lubricating polymer bearing rated for outdoor use, and that system has been running without issues for 8 years now.
Once you have your requirements, the next step is to prioritize interchangeability and modularity—this is where general components shine, if used right. A common mistake is designing a system around a unique, custom part, which becomes a single point of failure and a nightmare when you need to scale. Instead, general components are built to be swapped and reused across different system versions. Let’s take that robotics picker example again. When they first started out, their lead engineer wanted to custom-machine a metal bracket to mount their gripper, but I suggested using a standard aluminum extrusion t-slot bracket instead. That bracket is designed to fit any t-slot extrusion, which is a general component used in everything from conveyor systems to workstations. If they change their gripper design next year, they don’t have to machine a new bracket—they can just adjust the t-slot mount, which is available off-the-shelf. Interchangeability also makes maintenance and repairs easier: if a bracket breaks on a warehouse floor, a technician can grab a replacement from the stock room, not wait 2 weeks for a custom part to be machined. Modularity is a close cousin to interchangeability. When you build a system using general components, each module (like a power supply, a motor, a sensor) should be a self-contained unit that can be swapped out without affecting the whole system. For a medical device, that means a standard ECG sensor module that works with multiple device enclosures, instead of a custom sensor tied to one specific device model. Modularity doesn’t just save money on production—it makes updating and repairing systems way less stressful. I’ve seen companies cut their maintenance costs by 40% just by switching to general, interchangeable components instead of custom parts, because they no longer have to stock dozens of unique spare parts.
Another key principle is to validate compatibility before you integrate parts. Even if two general components have the same dimension on paper, that doesn’t mean they’ll work together. Last year, a team building an agricultural seeder contacted me saying their linear actuator and guide rail kept binding, even though both were standard, ANSI-rated parts. I asked them to send over the spec sheets, and it turned out the actuator’s shaft tolerance was +0.002mm, while the guide rail’s bearing bore was +0.005mm— a tiny mismatch that didn’t show up on individual catalog specs, but caused friction when they were assembled. The fix was simple: we swapped for an actuator with a tighter tolerance, matched to the guide rail’s standard bore, and the seeder ran smoothly. How do you avoid this? Always check the mating specifications of parts that will connect. For example, if you’re pairing a bolt and a nut, confirm their thread type, pitch, and class fit (like 2A/2B for general use) before ordering. For electrical components, check voltage ratings, connector pinouts, and insulation resistance to make sure they work together. Many general component suppliers (including my company) keep a compatibility database or offer pre-assembled sample kits so you can test parts together before you commit to a full order. That small step of testing early can save you from costly rework later. You don’t want to spend months designing a system only to find two general parts don’t fit, or work well enough for your needs.
Don’t forget about long-term availability and supply chain resilience. One of the biggest headaches for product teams these days is component shortages. A few years ago, a team building a point-of-sale terminal I was working with switched to a new microswitch that was slightly cheaper, not realizing it was a new part with a 2-year production run. 18 months later, the manufacturer discontinued the switch, and they had to redesign their entire terminal line to use a different switch, costing them $200,000 in rework and lost sales. General components, when chosen right, are designed to be in production for years, because they’re used across hundreds of applications. When selecting a general component, ask your supplier how long it’s been in production, what the manufacturer’s long-term production plans are, and if there are alternative parts that meet the same specs if the original is ever discontinued. At my company, we only stock general components that have been in production for at least 5 years, and we maintain a list of direct equivalents for every part in our catalog, so our clients never get stuck when a part is phased out. We also work with multiple manufacturers for high-demand parts, so if one source has a delay, we can shift production to another without affecting our clients’ timelines. That’s the value of working with a reliable general component supplier—we take the guesswork out of supply chain risk.
Now, let’s talk about a common pushback I get from engineers: “General components are lower quality than custom parts.” That’s a myth, if you choose the right general components. Custom parts are made for one specific job, so manufacturers might cut corners on material or testing to meet a tight deadline. General components, on the other hand, are mass-produced for widespread use, which means they undergo rigorous testing to meet industry standards. For example, a general purpose 304 stainless steel bolt used in construction goes through the same corrosion resistance testing as a custom bolt made for a single bridge project—often more, because it’s used in so many different environments. The difference is that custom parts might have a one-off finish or dimension, while general components are standardized to work across many systems. That doesn’t mean custom parts are never the right choice—if you need a part that only works for your specific system, like a highly specialized aerospace component, custom is the way to go. But for 80% of industrial, commercial, and consumer products, general components are more than enough, and they save you time and money without sacrificing quality.
Let’s wrap this up with a real example that ties all these principles together. A few years ago, a team building small electric delivery vans contacted me to help source components for their prototype. They had a goal: build a van that was cheaper to manufacture, easier to repair, and could be scaled quickly for 10,000 units a year. Let’s walk through how they used general components to hit that goal. First, they mapped their requirements: the van needed to support a 2,000-pound payload, have a top speed of 75 mph, be resistant to road salt and debris, and have a 5-year lifespan. Next, instead of designing a custom frame, they chose standard aluminum extrusion profiles, which are general components used in everything from factory workstations to vehicle frames. These extrusions are ISO-standard, so they connect to other standard parts like brackets and joints. They chose a general purpose electric motor rated for 50 kW, which is used in golf carts, small trucks, and industrial equipment, so they knew it had a long production history and multiple suppliers. For braking systems, they used standard hydraulic brake calipers and rotors, which are interchangeable with thousands of other vehicles. They validated compatibility by testing the frame extrusions with the motor mounts and brake calipers, and found a bracket that fit all three without modification. They prioritized interchangeability by designing every module (motor, battery pack, braking system) to use general components, so if they needed to switch to a higher-capacity battery in the future, they could swap out only the battery, not the entire frame. The result? Their prototype cost 30% less to build than a custom-framed van, scaled to 10,000 units in 6 months (compared to a projected 12 months for custom parts), and their maintenance team can replace any broken part using off-the-shelf components at any local auto parts store. That’s the power of designing a system with general components.
At the end of the day, designing a system with general components is about being smart, not lazy. It takes time to define your requirements, validate compatibility, and plan for long-term availability, but the payoff is huge: lower costs, faster scaling, easier maintenance, and less risk of supply chain delays. If you’re working on a new product or system and you’re not sure where to start, the best first step is to talk to a general components supplier that understands these principles, not just a catalog of parts. A good supplier will help you navigate the hundreds of options, avoid common mistakes, and find components that fit your needs without overcomplicating things.

If you’re ready to design a system using general components, or if you’re looking to streamline your supply chain with reliable, interchangeable parts, reach out to our team to discuss your project. We work with startups, large manufacturers, and engineering teams across every industry, and we’re here to help you build systems that are efficient, reliable, and built to scale.
Chain References
- International Organization for Standardization. (2020). General Purpose Standardized Components for Industrial Systems. ISO 898-1: Mechanical Properties of Fasteners.
- US Department of Energy. (2022). Supply Chain Resilience for General Components in Clean Energy Systems. Energy Efficiency and Renewable Energy Office.
- Society of Manufacturing Engineers. (2021). Modular Design Principles for General Component Integration. SME Press.
- Material Science and Engineering, Volume 12. (2019). Standardization and Interchangeability: Reducing Costs in Industrial Design. Elsevier.
Zhejiang Hangte Chain Transmission Co., Ltd.
We are one of the most experienced general components manufacturers and suppliers in China since 1999. Please rest assured to buy high quality general components made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.
Address: No. 195 Qinglin East Street, Qingshan Lake Subdistrict, Lin’an District, Hangzhou City, Zhejiang Province
E-mail: hangtechain@gmail.com
WebSite: https://www.chinahtchain.com/