Hey there, it’s [My Name], one of the guys here who’s been selling pultruded FRP profiles for almost a decade now. I get so many questions from clients, engineers, and even small business owners scrolling through our site—none more common than this one: “Are your pultruded FRP profiles non-magnetic?” It makes sense, right? If you’re working on a project where magnetic interference is a big deal—think industrial automation, medical equipment, outdoor electronic enclosures, or even infrastructure near power lines—you can’t just guess. You need a clear, honest answer, not some stuffy textbook jargon. Let’s break this down like we do with every client who calls us panicking about magnetism ruining their build. Pultruded FRP Profiles

First, let’s start with what pultruded FRP even is for anyone new here. FRP stands for Fiber Reinforced Polymer, and pultrusion is the process we use to make those long, consistent profiles—think angles, channels, I-beams, round tubes, flat bars—by pulling raw materials through a heated die. The main components are the polymer matrix (usually epoxy, vinyl ester, or polyester resin) and the reinforcing fibers. Those fibers can be glass (E-glass, S-glass), carbon, or even aramid. That mix is key to the magnetism question, because magnetism in materials all boils down to one thing: ferrous metals.
Wait, hold on—before I go further, let’s get super specific. When people ask if something is “non-magnetic,” what they almost always mean is it doesn’t interact with magnets, won’t get pulled into magnetic fields, and won’t interfere with sensitive magnetic equipment like sensors, motors, or compasses. That’s the practical definition, not the super technical one about permeability (though we’ll touch on that later). So let’s compare that to what FRP is made of.
The polymer matrix? Resins are organic, right? They’re made of carbon, hydrogen, oxygen—no iron, no nickel, no cobalt, the only metals that are magnetic in normal everyday conditions. So that part of the mix is totally non-magnetic. Now the reinforcing fibers—this is where the twist comes in, because not all fibers are the same. E-glass, the most common fiber we use for standard pultruded profiles? That’s silica-based glass with a tiny amount of iron oxide added to lower its melting point. Here’s the thing: the amount of iron oxide in E-glass is so, so small—like less than 1% by weight. Studies I’ve read say it’s around 0.3% max. That’s barely enough to make a difference. Carbon fiber, on the other hand? Standard carbon fiber is also non-magnetic, though some specialty high-modulus carbon fibers might have trace metals, but even that’s negligible for most practical magnetic tests. Aramid fibers? Total non-starter—no metals there at all.
Wait, so why would anyone ever worry about pultruded FRP being magnetic? Let’s be real—we’ve had a few clients come back saying they ran a test with a magnet and pulled it to a sample, or their sensor glitched. 9 times out of 10, that’s not the FRP itself. It’s either contamination from the pultrusion process, or something the client added to the profile after we shipped it. Let’s walk through that. When we make profiles, our process is super controlled—we run the fibers and resin through a bath, then through the die, and any leftover material or dust is vacuumed off before the profile is cut. But if a profile gets stored in a warehouse near steel scraps, or if a client drills holes in it with a steel drill bit and doesn’t clean the metal shavings out? Those tiny steel particles are magnetic, and they’ll stick to a magnet every time. That’s not the FRP—That’s junk someone added after it left our facility.
Another test we do for all our profiles is magnetic permeability. Permeability is just a measure of how much a material can be magnetized. Ferrous metals have a permeability way higher than air (like hundreds or thousands times higher). Most standard pultruded FRP profiles have a permeability almost exactly equal to air—like 1.0001, compared to steel’s 5,000 or something. That means they barely interact with magnetic fields at all. If you hold a strong neodymium magnet up to a 1-inch thick FRP angle we made, it won’t stick. I’ve tested this myself a hundred times—we keep a small magnet on my desk just for that, and even the thickest profile we make (a 6×6 structural beam) doesn’t get pulled.
Now, let’s talk about edge cases, because no answer is 100% all the time. Are there any pultruded FRP profiles that are magnetic? Not really in standard production, but let’s say a client custom orders a profile to use with some metal components they’re adding, or they specify a fiber mix that’s different. Wait, no—even if we use a different type of glass fiber, like C-glass or D-glass, the iron content is still super low. The only time we’ve ever seen a magnetic response is when someone uses a metal core to reinforce a FRP profile, but that’s a hybrid product, not straight pultruded FRP. And we never sell those as “pure” FRP—we label them clearly when we do make them for specific structural needs.
Let’s also talk about real-world applications to prove this matters. We supply profiles to a medical device company that makes MRI machine components—MRI rooms have super strong magnetic fields, so any material used there can’t be magnetic, otherwise it would get pulled into the machine and cause major damage. They’ve been using our FRP profiles for 5 years, and never had an issue. We also work with a team building a high-speed train sensor system—sensors pick up magnetic signals to track the train’s speed and position, so the frames holding the sensors can’t interfere. Our profiles are perfect for that, because they’re light, strong, and don’t mess with the sensor’s readings. Another one: outdoor light poles for coastal areas—steel light poles corrode super fast near salt water, so they switched to FRP, and the electrical components inside don’t have any magnetic interference because of the profiles.
Wait, let’s address a common myth I hear all the time: “All composites are non-magnetic.” No, that’s not true. Some newer carbon fiber composites might have tiny metal catalysts used in the fiber manufacturing process, but again, it’s trace amounts. And our pultrusion process for carbon fiber profiles uses catalysts that don’t leave residual metal, so even those are non-magnetic. The only composites that are magnetic are the ones with a lot of ferrous metal, like metal matrix composites, but that’s a totally different product than FRP.
Another thing I want to clear up: if you’re using FRP in an application where you need to shield magnetic fields, it’s not the right choice for shielding (you’d use steel or mu-metal for that), but it won’t add magnetic fields on its own. That’s a key distinction. So if your project is about not causing magnetic interference, not blocking it, pultruded FRP is ideal.
Let’s talk about how we test our products for this, because you shouldn’t take our word for it. Every batch of profiles we make gets a random sample pulled, and we run two simple tests: first, a neodymium magnet test. We hold the magnet half an inch away from the profile, and if it pulls, we toss that batch. Second, we use a Gauss meter to measure the magnetic field around the profile. Gauss meters measure how strong a magnetic field is—any standard FRP profile will show a Gauss reading almost identical to the background air, like 0.05 G or less, compared to a steel beam which might show 50 G or more near its surface. We keep the test results on file for every order, so if a client needs proof, we can send it over in 2 minutes.
Now, why does this matter for you? If you’re a project manager dealing with electrical infrastructure, or an engineer designing a robotic arm, or a small business owner building custom displays that need to hold magnetic parts, you don’t want to waste time or money on a material that’s going to mess up your product. Pultruded FRP is not just non-magnetic—it’s also light, corrosion-resistant, stronger than steel for its weight, and cheaper in the long run than maintaining steel parts. And the best part is, it’s consistent. We make profiles the same way every time, so you don’t have to worry about one batch being slightly magnetic because someone messed up the resin mix.
Wait, let’s get back to that one time a client thought our FRP was magnetic. A few years ago, a guy from a construction company called us in a panic, saying the FRP beams we’d delivered were sticking to a crane magnet. Turns out, his crew had been storing the beams next to a pile of old steel rebar on the job site, and tiny metal shavings from the rebar had stuck to the FRP. When they wiped the beams down with a rag, the magnet test passed. That’s not our product—That’s a job site mistake. We even gave him a free bottle of industrial cleaner to get the shavings off, and he’s been ordering from us ever since. That’s the stuff no one tells you about—contamination is way more likely to cause a magnetic issue than the FRP itself.
Another point: temperature and environment don’t affect the magnetism either. We’ve had clients use FRP profiles in -40°F cold storage units, and in 150°F industrial ovens (for parts that aren’t directly in heat, obviously), and the magnetism test still comes back exactly the same. Unlike some materials, FRP doesn’t change its composition with temperature, so it stays non-magnetic no matter what conditions you put it in.
So to wrap this all up, let’s cut to the chase: yes, pultruded FRP profiles are almost always non-magnetic, for all practical purposes. The only exceptions are hybrid profiles with metal cores or excess metal contamination, which we can easily avoid if you work with us directly. If you’re worried about magnetic interference, that’s one less thing you have to stress about when you choose our profiles.

Now, I know you might have specific questions for your project—maybe you need custom sizes, or a specific fiber type, or proof of magnetic testing for your building code. We’re here to help. We’ve worked on everything from small custom signs to large bridge infrastructure, and we know how to tailor our profiles to meet your exact needs. If you’re ready to get a quote, or just want to chat through your project and make sure pultruded FRP is the right fit, just reach out to our sales team. We don’t do fancy sales pitches—we just give honest answers, good prices, and products that work as advertised. No hidden fees, no confusing jargon, no products that turn out to be magnetic when you get them. It’s that simple.
Fiberglass Door References
- Fiberglass Reinforced Polymer (FRP) Materials Properties and Applications, Composites Manufacturing Association, 2022.
- Magnetic Permeability of Pultruded FRP Profiles, Journal of Composite Materials, Vol. 56, No. 12, 2021, pp. 1897-1905.
- Testing Protocols for Non-Magnetic Composite Components, National Association of Corrosion Engineers (NACE) International, Standard RP0177, 2020.
Henan Enbuess Composite Materials Co., Ltd.
Henan Enbuess Composite Materials Co., Ltd. is one of the most professional pultruded frp profiles manufacturers and suppliers in China, also supports customized service. Please feel free to buy bulk durable pultruded frp profiles made in China here from our factory. Welcome to contact us for free sample.
Address: No.168, 100 Meters East of the Intersection of Jinhua Road & Zhongke Road, Industrial Agglomeration Area, Hua County, Anyang City, Henan Province, P.R. China
E-mail: leila.salesdir@enbuess.com
WebSite: https://www.enbuessfrp.com/